Panasonic MC-UG614, Operating Instructions Manual

Page: 7 / 24

-7-
C) ON/OFF SWITCH
B) HANDLE RELEASE
Release the handle by pressing down on the foot pedal
with your foot and pulling back and down on the handle
with your hand.
CAUTION
To prevent damaging carpeted floors, tiled
floors, linoleum, etc. Do not leave the agitator
rotating in the same place for too long.
OFF - Turns both suction and agitator motors off.
FLOOR - Turns on the suction motor only. In this
position the agitator assembly does not revolve.
Use this setting for cleaning hardwood and tile floors
and when any attachments (tools) are used.
CARPET - Turns on both the suction and the
agitator motors.
NOTE: After use, unplug the mains lead from the
socket and store the vacuum cleaner in the upright
(vertical) position.
1 1
OFF/FLOOR/
CARPET
Switch
Selector
Window
A) MAINS LEAD
1 1
Mains Lead
Cord Clip
1 2
Turn the quick release upper cord hook to either side
and down to release the mains lead.
Detach the plug from the mains lead and pull the
cord off the quick release upper cord hook.
Be sure the mains lead is locked under the cord clip
on the rear of the handle.
Plug the mains lead into a 240 Volt mains socket
located near the floor.
Note: To store mains lead, turn upper cord hook
to the up position, then wrap cord loosely
around quick release cord hook and carrying
handle. Refer to VACUUM CLEANER STORAGE
(page 12 ).
1 1
HOW TO OPERATE YOUR VACUUM CLEANER