Disassembly
Maintenance (Dust box)
Empty the dust box
Empty the dust box/Maintenance
Clear out the debris
before the dust level
line is exceeded!
EN14
Pleat filter
■
Even though the debris is thrown away,
the suction power does not recover…
■
When the lamps (blue and red) on the
operation unit flash at the same time and the
suction stops…
At these times, clean it out (on the right).
The lamp informs you
about the care times
(approximate)!
●
When the situations are as per the following, the
lamp might not flash even if it is filled with debris .
◦
When there is a lot of pet hair and cotton debris
(Directly check how much debris is accumulated)
●
At the following times, the lamp might flash
even if there is a little debris .
◦
When there is a lot of sand and dirt (discard
the debris)
◦
When the extension wand/nozzle is clogged with
debris (remove the debris)
◦
When using the telescopic 2-way nozzle
(directly check how much debris is accumulated)
2
Lift up the pleat filter to remove it
How fast the dust box fills up varies
depending on the rubbish type .
Check the Dust Level (
)
As a guide, once a week
Note
●
With a new carpet, the dust box is quickly filled up
with loose tufts. (Loose tufts will decrease with the
number of vacuuming times)
Note
1
Throw away the debris (see above)
1
Remove the dust box
Remove while lowering
the detachment button
Summary of Contents for MC-SB53KH046
Page 2: ...ENGLISH EN 正體 HK BAHASA MELAYU MA TIẾNG VIỆT VI ...
Page 83: ......