MAINTENANCE AND SERVICING
A) CLEANER STORAGE
Handle
Release
Button
Operating
Position
Storage
Position
Always follow all safety precautions when cleaning and servicing the vacuum cleaner.
WARNING: Electrical Shock And Personal Injury Hazard
Disconnect from electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock
or personal injury from cleaner suddenly starting.
WARNING: Electrical Shock And Personal Injury Hazard
Wrapping the mains lead too tightly around the hooks may cause damage to
the lead. A damaged lead is an electrical shock hazard and could cause per-
sonal injury or damage.
To rotate the handle to the storage position when the cleaner is not in use, press
handle release button and rotate handle counter-clockwise for easy storage.
NOTE: You should hear a noticeable “click” sound when handle reaches the storage
position.
B) CLEANING EXTERIOR AND ATTACHMENTS
CAUTION:
Do not use attachments if they are wet.
A
ttachments used in dirty areas, such as under a refrigerator,
should not be used on other surfaces until they are washed. They could leave marks.
Disconnect mains plug from wall outlet.
Clean exterior using a clean, soft cloth that has been dipped in a solution of mild liquid detergent and water, then wrung dry. Wipe dry
after cleaning. DO NOT drip water on cleaner.
Wash attachments in warm soapy water, rinse and air dry. Do not clean in dishwasher.
DO NOT use tools if they are wet.
- 7 -
Summary of Contents for MC-E4051
Page 17: ... 17 ...