7.4.1-4. Master Body Setting and Position
7.4.1-4.1 Master Body Setting
7.4.1-4.2 Master Body Position
Place the Lens so that the center of the Checking chart comes to the center of the monitor screen of Master Body.
(1) Adjust the height of a tripod so that the center of the Checking chart is corresponding to the height of the lens.
(2)
(3) Adjustment distance between the camera and Checking Chart by referring the following figure.
ESHTR (For Tele)
- Reset the settings. (it is available on setup menu in user's GUI menu.)
Focus mode (AFS/AFF)
AFS
Focus mode lever
Aspect Ratio
Monochrome
L (17M)
FINE
A (Aperture-priority AE mode)
Maximum aperture (
TELE: F5.6 / WIDE: F3.5
)
Multi
TELE:800 / WIDE:200
Off
- Perform cancellation of the Initial Settings. (Refer to the service manual for the master body.)
- Set the function parameter to below setting
Photo style
Metering mode
Picture size
Picture quality
Setting Item
Setting Value
Mode dial
Aperture
AFS/AFF
Shutter Type
AWB
3
：
2
AF mode
Exposure compensation
White balance
ISO
Image stabilizer
Self Timer
2 seconds
OFF
Align the position of DSC by using a set-square and so on.
0EV
Flash mode
1 point
Guide line of the Chart
Compact Checking Chart (For TELE)
Checking Chart (For WIDE)
About 3,000mm (TELE : H-FS14140)
About 1,100mm (WIDE : H-FS14140)
WIDE
(Checking chart SUKZ000059)
Guide line of the checking chart comes
to upper edge of the LCD screen
TELE
(Compact Checking Chart)
Left & Right chart's flame line
：
Meets with edge of LCD screen.
Upper & Lower chart's frame line : Out of LCD screen.
23
