Important
When tightening the screw, use a torque driver
(RFKZ0542) by ordering the screwing order with
specified torque described in each step.
1. Install the 3rd Lens Frame3 Unit.
1. To put the Direct Frame Shading Sheet so that a Gap
between the 2nd Lens Frame Unit and the Cam Barrel
is hidden.
6.2.2.2. Installation of the 3rd Lens Frame3 Unit
6.2.2.3. Removal of the 2nd Lens Frame Unit
1. Install the 2nd Lens Frame Unit after aligning
6.2.2.4. Installation of the Direct Frame
Shading Sheet
6.2.2. Assembly Procedure
1. Install the 5th Lens Frame2 Unit after aligning
phase mark ( ).
6.2.2.1. Installation of the 5th Lens Frame2 Unit
2. Installation notice
Do not forget to insert each FPC to each FPC slit.
phase mark ( ).
3rd Lens Frame3 Unit
FPC Slit
Insert
Insert
5th Lens Frame2 Unit
Phase mark ( )
2nd Lens Frame Unit
Phase mark ( )
Direct Frame Shading Sheet
1
