Panasonic Lumix DMC-LX5 Page 219 Basic Operating Instructions Manual Download

Page: 219 / 294

- 175 -

Advanced (Playback)

You can delete or change the information relating to Face Recognition for the selected
picture.

Select [FACE REC EDIT] on the [PLAYBACK] Mode menu.

(P28)

Note

• Cleared information regarding the [FACE RECOG.] cannot be restored.

• When all Face Recognition information in a picture has been canceled, the picture will not be

categorised using Face Recognition in [CATEGORY PLAY].

• You cannot edit the Face Recognition information of protected pictures.

[FACE REC EDIT]

Press

to select [REPLACE] or [DELETE] and

then press [MENU/SET].

Press

to select the picture and then press

[MENU/SET].

• You cannot select pictures for which Face Recognition

information has not been registered.

Press

to select the person and then press

[MENU/SET].

• [DELETE]

step

• You cannot select a person who has not been registered.

Press

to select the person to replace

and then press [MENU/SET].

Press

to select [YES] and then press [MENU/

SET].

Press [

‚

] to return to the menu screen.

• Press [MENU/SET] to close the menu.

Summary of Contents for Lumix DMC-LX5







































































































































































































































































































Search results

Summary of Contents for Lumix DMC-LX5

Reviews:

Related manuals for Lumix DMC-LX5

Brands by name

Popular brands

Panasonic Lumix DMC-LX5, Basic Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-LX5

Reviews:

Related manuals for Lumix DMC-LX5

Brands by name

Popular brands