Panasonic Lumix DMC-LX5 Page 265 Basic Operating Instructions Manual Download

Page: 265 / 294

- 221 -

Others

• Is the [STEP ZOOM]

(P146)

set to [ON]?

• Is the [CONVERSION]

(P150)

set to [

• Set the AF area to the distinctive color of the subject if there is a part that is different from the

surrounding color.

(P136)

• It is possible that the subject may be warped slightly, or the borders get colored, depending on

the zoom magnification, due to the characteristics of the lens. Also, the peripherals of the

image might look warped because the perspective is enhanced when the wide angle is used.

This is not a malfunction.

• The LCD monitor turns off and the status indicator lights when [AUTO LCD OFF]

(P35)

of the

[ECONOMY] Mode is activated.

[This does not happen when using the AC adaptor (optional).]

• This phenomenon appears when you press the shutter button halfway to set the aperture value

and does not affect the recorded pictures.

• This phenomenon also appears when the brightness changes when the camera is zoomed or

when the camera is moved. This is because of operation of the automatic aperture of the

camera, and it is not a malfunction.

• The LCD monitor may flicker for a few seconds after turning the camera on indoors under

fluorescent light. This is not a malfunction.

• [POWER LCD] is activated.

(P32)

Zoom does not operate properly.

The subject cannot be locked. (AF track fails)

Lens

Recorded image may be warped, or nonexistent color is surrounding the
subject.

LCD monitor/External Live Viewfinder (DMW-LVF1; optional)

The LCD monitor turns off although the camera is turned on.

The LCD monitor/External Live Viewfinder (optional) becomes darker or brighter
for a moment.

The LCD monitor flickers indoors.

The LCD monitor is too bright or dark.

Summary of Contents for Lumix DMC-LX5







































































































































































































































































































Search results

Summary of Contents for Lumix DMC-LX5

Reviews:

Related manuals for Lumix DMC-LX5

Brands by name

Popular brands

Panasonic Lumix DMC-LX5, Basic Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-LX5

Reviews:

Related manuals for Lumix DMC-LX5

Brands by name

Popular brands