Wi-Fi/NFC
About connections
VQT5A33
- 232 -
■
When connecting with [Manual Input]
On the screen of step of “If you are not sure about the WPS
compatibility (connecting by [Manual Connection])”, select
[Manual Input]
(→231)
Enter the SSID of the wireless access point you are
connecting to, then select [Set]
•For details on how to enter characters, refer to “Entering Text”
(→65)
.
Select the network authentication type
•For information on network authentication, see the manual of the wireless access
point.
Select the encryption type
•The type of settings that can be changed may vary depending on the details of
network authentication settings.
Network authentication type
Encryption types that can be set
[WPA2-PSK] / [WPA-PSK]
[TKIP] / [AES]
[Common Key]
[WEP]
[Open]
[No Encryption] / [WEP]
(When an option other than [No Encryption] is selected)
Enter the encryption key
●
Check the wireless access points instruction manual and settings when a saving
wireless access point.
●
If no connection can be established, the wireless access point’s radio waves may
be too weak. Refer to “Message displays”
(→264)
and “Q&A Troubleshooting”
(→268)
for
details.
●
Transmission speed may decrease, or may not be usable depending on the
environment it is used in.
