Panasonic Lumix DMC-LC33PP Operating Instructions Manual Download

Page: 18 / 104

Preparation

Turning Power on/off

Set the power switch to [ON].

• The Status indicator

lights.

Set the power switch to [OFF].

• When the power switch is turned on, do not hold the lens cover. If the lens cover

does not open, [SYSTEM ERROR] is displayed. Turn the power switch off and on.

• Do not apply pressure to the lens when the lens tube comes out.

Status Indicator

Lights:

• When turning the Power switch to [ON].

Blinks:

• While the focus is being adjusted or the

focus is not properly adjusted.

• When the card is not inserted.
• When no space is left on the card.
• When the remaining battery power is low.

(blinks slowly)

Flash/Access Indicator

Lights:

• When accessing the card.
• When the flash fires. (It lights when the

shutter is pressed halfway)

• When sending data to PC.

Blinks:

• When charging the flash.
• When setting the flash mode to forced off

and recording in dark places. (blinks
slowly)

1,2

OFF

KC52-PP.book 18 ページ２００３年３月１３日　木曜日　午後２時２９分

Downloaded from

www.Manualslib.com

manuals search engine

Summary of Contents for Lumix DMC-LC33PP









































































































Search results

Summary of Contents for Lumix DMC-LC33PP

Reviews:

Related manuals for Lumix DMC-LC33PP

Brands by name

Popular brands

Panasonic Lumix DMC-LC33PP, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-LC33PP

Reviews:

Related manuals for Lumix DMC-LC33PP

Brands by name

Popular brands