Panasonic Lumix DMC-LC33PP Operating Instructions Manual Download

Page: 16 / 104

Preparation

Inserting the Card

[Preparation]
• Check that the power switch is set to [OFF]

and the lens is stored.

[Inserting the card]

Slide the door in the direction of the
arrow to open the Memory Card door.

Insert the card all the way in until it
clicks.

• Check the direction of the card.
• Do not touch the connection terminals on

the back side of the card.

Slide the door in the direction of the
arrow to close the Memory Card door.

[Removing the card]

Slide in the direction of the arrow to
open the Memory Card door.

Press the card to release.

Pull the card out.

Slide the door in the direction of the
arrow to close the Memory Card door.

• If you are using a MultiMediaCard type

memory card and the Memory Card door
cannot close, the card may be installed
backwards. Remove the card and reverse it,
then try to close the door again.

• If the Memory Card door cannot be

completely closed, take the card out and
insert it again.

• We recommend that you use a Panasonic

branded SD Memory Card. (Use only the
genuine card)

• If the card is not fully inserted, the card may

be damaged.

3,7

5,6

1,4

KC52-PP.book 16 ページ２００３年３月１３日　木曜日　午後２時２９分

Downloaded from

www.Manualslib.com

manuals search engine

Summary of Contents for Lumix DMC-LC33PP









































































































Search results

Summary of Contents for Lumix DMC-LC33PP

Reviews:

Related manuals for Lumix DMC-LC33PP

Brands by name

Popular brands

Panasonic Lumix DMC-LC33PP, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-LC33PP

Reviews:

Related manuals for Lumix DMC-LC33PP

Brands by name

Popular brands