Panasonic Lumix DMC-GH2H Operating Instructions Manual Download

Page: 153 / 200

153

VQT3A55

Connecting to other equipment

Connecting to other equipment

Enjoying 3D pictures

Attach the 3D interchangeable lens to the camera. (P19)

Bring the subject into the frame and record by pressing the shutter
button fully.

•

Focusing is not required when recording 3D pictures.

•

Still pictures recorded with the 3D interchangeable lens attached are saved in MPO format (3D).

Note

•

You cannot record 3D pictures in vertical orientation.

•

It is recommended to use a tripod or a flash to record steady pictures.

•

When a distance to the subject is 0.6 m to approximately 1 m, horizontal disparity becomes too

great, and you may not see the 3D effect at the edges of the image.

•

Up to approx. 460 3D pictures can be recorded on a 2 GB card. (When the aspect ratio is set to

[

], and the quality is set to [

].)

•

Read the operating instructions of the 3D interchangeable lens for details.

∫

Functions that cannot be used during 3D recording

When recording with the 3D interchangeable lens (H-FT012; optional), the following
feature will be disabled:

(Recording functions)

•

Auto Focus/Manual Focus operation

•

Aperture setting

•

Zoom operation

•

Recording motion pictures

•

[DYNAMIC ART] in My Colour Mode

•

Monitor output (P158)

1 The motion picture button, Creative Motion Picture Mode and the [MOTION PICTURE] Mode

menu will be unavailable or unusable.

Taking 3D pictures

Attaching the 3D interchangeable lens
(H-FT012; optional) to the camera allows you
to take 3D pictures for extra impact.
To view 3D pictures, a television that
supports 3D is required.

3D picture

The image is an illustration.

To ensure that the 3D pictures can be safely viewed, pay attention to the
following points when recording.

•

Where possible, record with the unit in a horizontal state.

•

Do not get too close to the subject [when the 3D interchangeable lens (H-FT012; optional) is

used, record from a distance of at least 0.6 m].

•

Be careful not to shake the camera while in a vehicle or walking.

DMC-GH2KGN-VQT3A55_eng.book 153 ページ２０１０年１０月１８日　月曜日　午後６時５４分

Summary of Contents for Lumix DMC-GH2H









































































































































































































Search results

Summary of Contents for Lumix DMC-GH2H

Reviews:

Related manuals for Lumix DMC-GH2H

Brands by name

Popular brands

Panasonic Lumix DMC-GH2H, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-GH2H

Reviews:

Related manuals for Lumix DMC-GH2H

Brands by name

Popular brands