Panasonic Lumix DMC-GH2H Operating Instructions Manual Download

Page: 24 / 200

VQT3A55

Preparation

Note

•

Remove the battery after use. Store the removed battery in the battery case (supplied).

•

The battery will be exhausted if left for a long period of time after being charged.

•

Before removing the battery, turn the camera off, and wait until the status indicator has gone off

completely. (Otherwise, this unit may no longer operate normally and the card itself may be

damaged or the recorded pictures may be lost.)

•

The supplied battery is designed only for the camera. Do not use it with any other equipment.

•

The battery becomes warm after using it and during and after charging. The camera also

becomes warm during use. This is not a malfunction.

∫

Battery indication

The battery indication is displayed on the screen.
[It does not appear when you use the camera with the AC adaptor (DMW-AC8G; optional)
connected.]

•

The indication turns red and blinks if the remaining battery power is exhausted. (The status

indicator also blinks) Recharge the battery or replace it with a fully charged battery.

∫

Recording still pictures (when using the LCD monitor)
(By CIPA standard in Programme AE Mode)

∫

Recording still pictures (when using the viewfinder)
(By CIPA standard in Programme AE Mode)

Approximate operating time and number of recordable pictures

When the 14–140 mm/F4.0–5.8 lens supplied in

DMC-GH2H

is used

Number of recordable pictures

Approx. 320 pictures

Recording time

Approx. 160 min

When the 14–42 mm/F3.5–5.6 lens supplied in

DMC-GH2K

is used

Number of recordable pictures

Approx. 330 pictures

Recording time

Approx. 165 min

When the 14–140 mm/F4.0–5.8 lens supplied in

DMC-GH2H

is used

Number of recordable pictures

Approx. 330 pictures

Recording time

Approx. 165 min

When the 14–42 mm/F3.5–5.6 lens supplied in

DMC-GH2K

is used

Number of recordable pictures

Approx. 340 pictures

Recording time

Approx. 170 min

DMC-GH2KGN-VQT3A55_eng.book 24 ページ２０１０年１０月１８日　月曜日　午後６時５４分

Summary of Contents for Lumix DMC-GH2H









































































































































































































Search results

Summary of Contents for Lumix DMC-GH2H

Reviews:

Related manuals for Lumix DMC-GH2H

Brands by name

Popular brands

Panasonic Lumix DMC-GH2H, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-GH2H

Reviews:

Related manuals for Lumix DMC-GH2H

Brands by name

Popular brands