81
VQT3A48
Recording
[REC] Mode:
Taking Pictures with the Self-timer
Set the drive mode lever to [
ë
].
Press the shutter button halfway to focus
and then press it fully to take the picture.
A
When self-timer is set to [
].
• A picture is not taken until the subject is brought into
focus.
Focus and exposure will be set when the
shutter button is pressed halfway.
• If you want to press the shutter button fully to take a
picture even when the subject is not focused, set [FOCUS PRIORITY] in the [CUSTOM]
menu to [OFF]. (P131)
• The self-timer indicator
B
blinks and the shutter is activated after
10 seconds (or 2 seconds).
• If you press [MENU/SET] while taking a picture with the self-timer, it
is cancelled.
• When [
] is selected, the self-timer indicator blinks again after the
first and the second pictures are taken and the shutter is activated
2 seconds after it blinks.
∫
Changing the time setting for the self-timer
1
Select [SELF-TIMER] in the [REC] Mode menu. (P55)
2
Press
3
/
4
to select the mode and then press [MENU/SET].
Note
• When using a tripod etc., setting the self-timer to 2 seconds is a convenient way to avoid the
jitter caused by pressing the shutter button.
• We recommend using a tripod when recording with the self-timer.
• Depending on the recording conditions, the recording interval may become more than
2 seconds when [
] is selected.
• The flash output may not be constant when [
] is set.
• Up to 3 films are recorded automatically, depending on the Multi Film Bracket setting, when the
shutter button is pressed once during the recording with Multi Film Bracket.
• Use the Quick Menu (P56) to set when in Intelligent Auto Mode.
• It cannot be set to [
] in Intelligent Auto Mode or when White Balance Bracket or Aspect
Bracket is set.
• The self-timer will be disabled during recording of the motion pictures.
Item
Settings
10 seconds
After 10 seconds the camera takes 3 pictures at about 2 second intervals.
2 seconds
A
DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 81 ページ ２０１０年１０月１４日 木曜日 午後３時５０分
