21
VQT3A48
Preparation
Preparation
Attaching/Detaching the Lens
• Check that the camera is turned off.
• Change lenses where there is not a lot of dirt or dust. Refer to P178, P179 when dirt or dust
gets on the lens.
Turn the lens rear cap
A
and the body cap
B
in the direction of the
arrow to detach them.
• Do not put your hands inside the mount.
Align the lens fitting marks
C
(red
marks) on the camera body and the lens
and then rotate the lens in the direction
of the arrow until it clicks.
• Do not press the lens release button
D
when you
attach a lens.
• Do not try to attach the lens when holding it at an
angle to the camera body as the lens mount may
get scratched.
Detach the lens cap.
Attaching a lens to the camera body
DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 21 ページ 2010年10月14日 木曜日 午後3時50分