185
Recording
4
Press the shutter button halfway to focus and
then press it fully to take the picture.
• A picture is not taken until the subject is brought into
focus. Focus and exposure will be set when the shutter
button is pressed halfway.
• If you want to press the shutter button fully to take a
picture even when the subject is not focused, set [Focus/Release Priority] in the
[Custom] menu to [RELEASE].
• The self-timer indicator
A
blinks and the shutter is
activated after 10 seconds (or 2 seconds).
• When [
] is selected, the self-timer indicator blinks
again after the first and the second pictures are taken and
the shutter is activated 2 seconds after it blinks.
∫
Cancelling the self-timer
Select [
] (single picture recording) or [
] from among the drive modes.
• It is also possible to cancel by turning off this unit.
• Time setting for the self timer can also be set by [Self Timer] in the [Rec] menu.
• Depending on the recording conditions, the recording interval may become more than
2 seconds when [
] is selected.
• The flash output may vary slightly when the [
] is selected.
Not available in these cases:
• It cannot be set to [
] in the following conditions.
– When White Balance Bracket is set
– [Multi Exp.]
• Self-timer is disabled in the following cases.
– When recording motion pictures
– When using [Time Lapse Shot]
– In [Stop Motion Animation] (only when [Auto Shooting] is set)
Cancelling/not cancelling the self-timer when this unit is turned off
[MENU]
>
[Custom]
>
[Self Timer Auto Off]
>
[ON]/[OFF]
• At the time of purchase, this is set to [ON], so the self-timer will be cancelled if this unit is
turned off.
• We recommend using a tripod when recording with the self-timer.
DMC-G6PDF-VQT4Z82_mst.book 185 ページ ２０１３年４月１８日 木曜日 午前１１時５３分
