85
VQT1U32
Advanced (Recording pictures)
•
When the flash is activated, the shutter speed cannot be set to faster than 1/160th of a second
in Shutter-priority AE mode. (P60)
•
If you press the shutter button fully when the shutter speed is slow, the shutter speed on the
screen counts down in Shutter-priority AE mode.
•
[
] and [
] cannot be set for Shutter-priority AE mode.
•
The [SENSITIVITY] is automatically set to [AUTO] when you switch the recording mode to
Shutter-priority AE mode while the [SENSITIVITY] is set to [
] (Intelligent).
[REC] mode:
²
Taking picture by setting the exposure manually
Determine the exposure by manually setting the aperture value and the shutter speed.
Set the mode dial to [
²
].
Rotate the front dial to set the aperture
and shutter speed.
•
It will switch between aperture setting operation and
shutter speed setting operation every time the front
dial is pressed.
•
You can also set the focus manually by rotating the
focus mode dial to [MF]. (P45)
Press the shutter button halfway.
•
The manual exposure assistance
A
appears on the
lower portion of the screen to indicate the exposure.
•
Set the aperture value and the shutter speed again
when the exposure is not adequate.
Take the picture.
∫
Manual Exposure Assistance
•
The manual exposure assistance is an approximation. We recommend checking the pictures
on the playback screen.
∫
About [B] (Bulb)
If you set the shutter speed to [B], the shutter stays open while the shutter button is
pressed fully (up to about 4 minutes).
The shutter closes if you release the shutter button.
Use this when you want to keep the shutter open for a long time to take pictures of
fireworks, a night scene etc.
The exposure is adequate.
Set to faster shutter speed or larger aperture value.
Set to slower shutter speed or smaller aperture value.