manualshive.com logo in svg

Panasonic Lumix DMC-G1, Operating Instructions Manual, Page: 31 / 168

Share
Download
Panasonic Lumix DMC-G1 Operating Instructions Manual Download Page 31

31

VQT1U32

Preparation

•

If there are any white saturated areas, we 
recommend compensating the exposure towards 
negative (P63) referring to the histogram (P56) and 
then taking the picture again. It may result in a better 
quality picture.

•

There may be white saturated areas if the distance 
between the camera and the subject is too close 
when taking pictures with the flash. 
If [HIGHLIGHT] is set to [ON] in this case, the area directly illuminated by the photo flash will 
become white saturated and appear blinking in black and white.

•

Press the shutter button halfway or turn the camera off and on to cancel [POWER SAVE].

•

[POWER SAVE] is set to [5MIN.] in the Intelligent auto mode.

•

[POWER SAVE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].

•

Press any button to turn on the LCD monitor again.

•

Adjust the brightness of the screen with 

3

/

4

, contrast and saturation 

with 

2

/

1 

or the front dial.

•

It will adjust the LCD monitor when the LCD monitor is in use, and the 
viewfinder when the viewfinder is in use.

 [HIGHLIGHT]

When the Auto Review function is activated or when playing back, 
white saturated areas appear blinking in black and white.

[OFF]/[ON]

q

 [ECONOMY]

You can conserve the battery life by setting these menus.
Also, it will turn off the LCD monitor automatically when not in use 
to prevent discharge of the battery.

p 

[POWER SAVE]:

The camera is automatically turned off if the camera has not been 
used for the time selected on the setting.

[OFF]/[1MIN.]/[2MIN.]/[5MIN.]/[10MIN.]

 

[AUTO LCD OFF]:

The LCD monitor is automatically turned off if the camera has not 
been used for the time selected on the setting.

[OFF]/[15SEC.]/[30SEC.]

 

[MONITOR]/

[VIEWFINDER]

Brightness and color of the LCD monitor/viewfinder can be 
adjusted in 7 steps.

 [LCD MODE]

These menu settings make it easier to see the LCD monitor when 
you are in bright places.

[OFF]

„

 [AUTO POWER LCD]:

The brightness is adjusted automatically depending on how bright 
it is around the camera.

…

 [POWER LCD]:

The LCD monitor becomes brighter and easier to see even when 
taking pictures outdoors.

[ON]

[OFF]

LCD

Summary of Contents for Lumix DMC-G1









































































































































































Reviews:

No comments