VQT1U32
82
Advanced (Recording pictures)
Note
•
In film mode, the camera may do something equivalent to pull processing or push processing to
create a picture with particular characteristics. The shutter speed may become very slow at this
time.
•
You can also set from the quick menu. (P29)
Press
2
/
1
to select a film.
Press
3
/
4
to select an item and
2
/
1
to adjust.
•
You can also use the front dial to adjust.
•
Registered settings are memorized even if the camera is
turned off.
Press [FILM MODE], press
3
/
4
to select an item,
and then press [MENU/SET].
•
You can register 2 settings. ([MY FILM 1] and [MY FILM 2])
(After registering, the film mode name that was registered
previously is displayed.)
•
[STANDARD] is registered in [MY FILM 1] and [STANDARD]
(
) is registered in [MY FILM 2] at the time of purchase.
Note
•
Noise may become visible when you take pictures in dark places. To avoid picture noise, we
recommend setting [NOISE RED.] towards [
_
] or setting the items except [NOISE RED.]
towards [
`
] to take pictures.
•
If you adjust a film mode, [
_
] is displayed beside the film mode name on the LCD monitor/
Viewfinder.
•
You cannot adjust [SATURATION] in the black and white settings in film mode.
•
Film mode cannot be adjusted in the Intelligent auto mode, advanced scene mode and scene
mode.
Adjusting each film mode to the desired setting
Item
Effect
[CONTRAST]
[
r
]
Increases the difference between the brightness and the
darkness in the picture.
[
s
]
Decreases the difference between the brightness and the
darkness in the picture.
[SHARPNESS]
[
r
]
The picture is sharply defined.
[
s
]
The picture is softly focused.
[SATURATION]
[
r
]
The colors in the picture become vivid.
[
s
]
The colors in the picture become natural.
[NOISE RED.]
[
r
]
The noise reduction effect is enhanced. Picture resolution may
deteriorate slightly.
[
s
]
The noise reduction effect is reduced. You can obtain pictures
with higher resolution.