Panasonic Lumix DMC-G1 Operating Instructions Manual Download Page 59

Page: 59 / 168

VQT1U32

Advanced (Recording pictures)

The flash is activated twice. The interval between the first and second flash is longer
when [

], [

] or [

] is set. The subject should not move until the second

flash is activated.
Flash interval depends on the brightness of the subject.

∫

About the digital red-eye correction

When the flash is used with the Red-eye reduction ([

], [

]) selected, it will

automatically detect and correct the red-eye in the image data.

•

It may not be able to correct the red-eye depending on the recording conditions. It may also
correct objects other than red-eye.

•

It can be set to [OFF] ([

], [

]) with the [D.RED-EYE] in the [REC] mode menu

(P101).

∫

Available flash settings by recording mode

The available flash settings depend on the recording mode.
(

: Available, —: Not available,

: Initial setting of advanced scene mode and scene

mode)

When [

‡

] is selected, [

], [

] or [

] is set depending on the type of subject and

brightness.

(

Slow sync./Red-eye
reduction

If you take a picture with a dark background landscape, this feature will
slow the shutter speed when the flash is activated so that the dark
background landscape will become bright. Simultaneously it reduces the
red-eye phenomenon.

•

Use this when you take pictures of people in front of a dark
background.

: Forced flash OFF

The flash is not activated in any recording conditions.

•

Use this when you take pictures in places where the use of the
flash is not permitted.

‡

‰

‡

‰

—

○

—

;

—

Summary of Contents for Lumix DMC-G1









































































































































































Search results

Summary of Contents for Lumix DMC-G1

Reviews:

Panasonic Lumix DMC-G1, Operating Instructions Manual, Page: 59 / 168

Search results

Summary of Contents for Lumix DMC-G1

Reviews: