Panasonic LUMIX DMC-FZ2B, Operating Instructions Manual, Page: 62 / 108

Recording images (advanced)
62
Finely Adjusting the White Balance
If you cannot acquire the desirable hue with
[W.BALANCE] because of different light
sources, etc., adjust the fine white balance as
follows.
[Preparation]
• Set the mode dial to any position except
[ ]/[ ]/[ ]. (P27)
• Set the white balance to [ ]/[ ]/[ ]/
[ ].
1
Press
3
until [ WB ADJUST.] is
selected.
2
Adjust the white balance with
2
/
1
.
1
[BLUE]: Press when the hue is
reddish.
2
[RED]: Press when the hue is
bluish.
3
Press the
4
/[REVIEW/SET] button.
• The adjustment display will disappear.
• The colour of the white balance icon is
turned into red or blue.
4
Take a picture.
• When you set the white balance by the
white set mode [ ], the adjustment level
is set to 0.
• You can set the value independently for
each of the modes in [W.BALANCE].
• When using the colour effect mode, you
cannot adjust the white balance.
4
1,2,3
2
WB ADJUST.
RED BLUE
EXIT SELECT
FZ2‑B.book 62 ページ ２００３年７月２２日 火曜日 午後１時４６分