Panasonic LUMIX DMC-FZ2B, Operating Instructions Manual, Page: 19 / 108

Preparation
19
Turning Camera on/off
1
Set the camera switch to [ON].
• The power indicator 1 lights.
• The lens will extend out.
2
Set the camera switch to [OFF].
• The lens will retract.
ª
Power indicator
Lit:
• When turning the camera switch to
[ON]
Blinking:
• When the Memory Card/battery door is
opened
• When the card is not inserted
• When no space is left in the card
• When the card is protected during
recording
• When setting the mode dial from the
playback mode to recording mode with
the lens cap attached
• When the remaining battery power is
low (blink slowly)
• When the camera switch is turned on, do not hold the lens cap. If the lens cap is
not removed, [SYSTEM ERROR] will be displayed. Turn the camera switch off,
remove lens cap, then switch the camera on again.
• When turning on the camera in the recording mode, do not put any obstacle in
front of the lens.
• Please be sure to remove the lens cap before you switch on the camera in
recording mode. If not, the message “REMOVE LENS CAP AND PRESS
BUTTON” appears on the LCD monitor/Viewfinder. Please remove the lens
cap and press
4
/[REVIEW/SET] button
2
.
• Do not put pressure on the lens when the lens barrel comes out. Ensure that the
lens has fully retracted before wiping it.
OFF
≥ ≥
ON
1,2
OFF
≥ ≥
ON
FZ2‑B.book 19 ページ ２００３年７月２２日 火曜日 午後１時４６分