manualshive.com logo in svg

Panasonic LUMIX DMC-FZ2B, Operating Instructions Manual, Page: 22 / 108

Share
Download
Panasonic LUMIX DMC-FZ2B Operating Instructions Manual Download Page 22

Preparation

22

ª

Temporarily storing the lens hood

You can store the lens hood in the camera 
temporarily. Please do not take a picture with 
the lens hood stored.

[Preparation]
• Check that the camera switch is set to [OFF] 

and the lens barrel is fully retracted.

• Close the flash. (P39)

1

Remove the lens hood.

2

Reverse the lens hood and attach it.

• Attach the lens hood adjusting the 

mark

±

 of the lens hood adapter to the 

mark of the lens hood, and rotate the 
lens hood to the right.

3

Attach the lens cap.

• When taking pictures with flash, flash light is 

interrupted by the lens hood and the bottom 
of the screen becomes dark. (vignetting 
effect)
We recommend you to remove the lens 
hood/lens hood adapter.

• Even when the lens hood is attached, you 

can attach the lens cap without the string.

1

2

3

FZ2‑B.book  22 ページ  ２００３年７月２２日 火曜日 午後１時４６分

Summary of Contents for LUMIX DMC-FZ2B













































































































Reviews:

No comments