- 213 -
Others
•
If the camera is moved too slowly, the camera has assumed that camera motion was stopped and
will end the still picture recording.
•
If there is a great deal of shaking towards the recording direction while moving the camera, recording
will end.
>
When recording with [Panorama Shot], move the camera by trying to trace a small circle parallel
to the recording direction at a speed of about 8 seconds per revolution (estimated).
•
It is possible that the subject may be warped slightly, or the borders get colored, depending on the
zoom magnification, due to the characteristics of the lens. Also, the peripherals of the image might
look warped because the perspective is enhanced when the wide angle is used. This is not a
malfunction.
•
This phenomenon appears when you press the shutter button halfway to set the aperture value and
does not affect the recorded pictures.
•
This phenomenon also appears when the brightness changes when the camera is zoomed or when
the camera is moved. This is because of operation of the automatic aperture of the camera, and it is
not a malfunction.
•
The LCD monitor may flicker for a few seconds after this unit is turned on. This is an operation to
correct flicker caused by lighting such as fluorescent lights, LED lights etc. and is not a malfunction.
•
Check [LCD Mode] setting.
(P58)
•
Perform [LCD Display]/[Viewfinder].
(P58)
•
Does the picture appear on the Viewfinder?
>
Press [EVF/LCD] button to switch to LCD monitor display.
•
This is not a malfunction.
These pixels do not affect the recorded pictures.
Recording by [Panorama Shot] is ended before finishing.
Lens
Recorded image may be warped, or nonexistent color is surrounding the subject.
LCD monitor/Viewfinder
The LCD monitor/Viewfinder becomes darker or brighter for a moment.
The LCD monitor flickers indoors.
The LCD monitor/Viewfinder is too bright or dark.
The picture is not displayed on the LCD monitor.
Black, red, blue and green dots appear on the LCD monitor.
