Panasonic Lumix DC-S1, Owner'S Manual

Page: 457 / 520

17. Materials
457
™
Lens
0 Remove the lens once, and then attach it again without pressing the lens release
button. (
l 49 )
Turn on the camera again, and if it is still displaying, contact the dealer.
0
Remove the lens from the camera body and gently wipe the contacts on the lens and
the camera body using a dry cotton swab.
Attach the lens, turn on the camera again, and if it is still displaying, contact the
dealer.
™
Battery
0 Use a genuine Panasonic battery.
If this message is displayed even when a genuine Panasonic battery is used, contact
the dealer.
0 If the terminal of the battery is dirty, remove the dirt and dust from them.
™
Wi-Fi
0 The wireless access point information set on the camera is wrong.
Check the authentication type and encryption key. (
l 415 )
0
Radio waves from other devices may block the connection to a wireless access
point.
Check the status of other devices that are connected to the wireless access point as
well as the status of other wireless devices.
[The lens is not attached properly. Do not push lens release button
while lens is attached.]
[Lens attachment failed. Please make sure the lens is attached
correctly.]
[This battery cannot be used]
[Failed to connect wireless access point]/[Connection failed]/[No
destination found]