17. Materials
462
0
This is characteristic of CMOS sensors which serve as
the camera’s pickup sensors.
This is not a malfunction.
0
When using the electronic shutter (
), lowering the
shutter speed may reduce the effect of the horizontal
stripes.
0
If flicker is noticeable when recording pictures, set
[Flicker Decrease (Photo)]. (
0
If flicker or horizontal stripes are noticeable when recording video, this can be
mitigated by fixing the shutter speed.
Either set [Flicker Decrease (Video)] (
0
Stripes may appear in high ISO sensitivity or depending on the lens you use.
Decrease the ISO sensitivity. (
0
When recording under fluorescent or LED lighting fixture, etc., increasing the shutter
speed may introduce slight changes to brightness or coloring.
These are a result of the characteristics of the light source and do not indicate a
malfunction.
0
When recording subjects in extremely bright locations or recording under fluorescent
lighting, LED lighting fixture, mercury lamp, sodium lighting, etc., the coloring or
screen brightness may change or horizontal striping may appear on the screen.
0
Pixels may be missing from the image sensor.
Perform [Pixel Refresh]. (
0
At the time of purchase, [Silent Mode] is registered to the Fn lever.
Switch the Fn lever to [MODE1]. (
Striping or flicker may appear under lighting such as fluorescent
lighting and LED lighting fixture.
Stripes appear in high ISO sensitivity.
The brightness or coloring of the recorded image is different from the
actual scene.
Bright spot not in subject is recorded.
Cannot set [Silent Mode] to [OFF].
Summary of Contents for Lumix DC-S1
Page 1: ...Owner s Manual Digital Camera DC S1 DVQP1869ZA F0319MR0...
Page 516: ...17 Materials 516...
Page 520: ......