Panasonic Lumix DC-S1, Owner'S Manual

Page: 415 / 520

15. Wi-Fi/Bluetooth
415
™
Connecting by Manual Input
1 In the screen in Step 1 of “[From List]”, select [Manual Input]. (
l
414 )
2 Enter the SSID of the wireless access point you are connecting to, and
then select [Set].
0 For information on how to enter characters, refer to page 369 .
3 Select the network authentication type.
4 (When other than [No Encryption] is selected)
Enter the encryption key and then select [Set].
0
Check the SSID, security type, encryption type, and encryption key of the
wireless access point you are using.
[WPA2-PSK]
Supported encryption methods: [TKIP], [AES]
[WPA2/WPA-PSK]
[No Encryption]
—
0
Check the operating instructions and settings of the wireless access point.
0 If a connection cannot be made, the signal strength of the wireless access
point may be too weak.
For details, refer to “Message Displays” (
l 456 ) and “Troubleshooting”
(
l
459 ).
0 Depending on your environment, the communication speed with the wireless
access point may decrease, or the wireless access point may not be available
for use.