Panasonic LUMIX DC-G95D Owner'S Manual For Advanced Features Download Page 108

Page: 108 / 338

4. Focus, Brightness (Exposure) and Color tone Settings

108

MF Assist (enlarged screen)

Peaking

MF Guide

• In-focus portions are highlighted with color. (Peaking)
• You can check whether the point of focus is to the near

side or to the far side. (MF Guide)

You can perform the following operations:

1 When using an interchangeable lens with no focus ring, you can perform these

operations after pressing

to display the screen that lets you set the area to be

enlarged.

2 Not available in Intelligent Auto Mode.

• When the picture is displayed in windowed mode, you can enlarge the picture by

approximately 3

to 6

; when the picture is displayed in full screen, you can enlarge

the picture by approximately 3

to 20

When using an interchangeable lens with no focus ring

Press

: Focuses on nearby subject

Press

: Focuses on distant subjects

Slide bar

• Pressing and holding

will increase the

focus speed.

• Focus can also be adjusted by dragging the slide

bar.

Button operation Touch operation

Description of operation

Dragging

Moves the enlarged area.

Pinching out/in

Enlarges/reduces the screen in small steps.

Enlarges/reduces the screen.

Switches the enlarged display (windowed/full
screen).

[DISP.]

[Reset]

First time:
The position of the enlarged area is reset to the
center.
Second time:
The size is reset to the default.

Summary of Contents for LUMIX DC-G95D



















































































































































































































































































































































Search results

Summary of Contents for LUMIX DC-G95D

Reviews:

Brands by name

Popular brands

Panasonic LUMIX DC-G95D, Owner'S Manual For Advanced Features

Search results

Summary of Contents for LUMIX DC-G95D

Reviews:

Brands by name

Popular brands