21
9. Settings Overview
Normal State (6-1)
Year
User setting mode
(8-1)
Operation mode setting
Lower discharge
limit setting
Child lock setting
Display mode
Setting mode
Show the current setting
Set the [ProG] / scheduled operation
and [bu] / Charging priority by
"DATA (▲)" "CLOCK (▼)"
Operation Mode Setting (8-2)
Year
* Make sure
that the
system is
not in
operation.
Display mode
Setting mode
Show the current setting
Lower discharge limit setting (8-3)
Display mode
Setting mode
Charging/Discharging Schedule Setting (8-4)
Display mode
Setting mode
Child Lock Setting (8-6)
Set ON and OFF with the "DATA (▲)"
"CLOCK (▼)"
Show the current setting
Display mode
Setting mode
Daylight-saving Time Setting (8-5)
Set ON and OFF with the "DATA (▲)"
"CLOCK (▼)"
Show the current setting
Show the current setting
Charging/dis-charging
schedule setting
Daylight-saving time
setting
Automatic
Automatic
Date/Time
Normal Display
User Settings
Date/Time Display (7-1)
Month/Day
Hour/Minute
▪ Year→Month/Day→Hour/Minute
Each displayed for two seconds.
▪
Returns to normal state
automatically after the display.
Date/Time Setting (7-2)
Month
Day
Hour
Minute
Display of Setting
▪ Press "DATA (▲)" or "CLOCK (▼)" to
change the selected (i.e. blinking) value.
▪
Change configurable items by
"MENU (ENTER)"
(Example)
A: Set Hour [A10.00]
→ A: Set Minute [A10.
00]
→ B: Set Hour [b
12.00]
→ B: Set Minute [b12.
00]
→ C: Set Hour [c
14.00]
→ C: Set Minute [c14.
00]
→ D: Set Hour [d
16.00]
→ D: Set Minute [d16.
00]
▪
Return to the display mode by "MENU
(ENTER)" after "D: Set Minute".
▪
There are three modes of view: Normal state, Remaining battery
level, and Operation mode.
▪ Press the "DATA (▲)" to change the display mode.
▪
The remaining battery level and operation mode views automatically
return to the normal state after five minutes of inactivity.
e.g. Operation mode
▪ In the normal state, you can view the operating status as
follows.
Stopped (Grid-connected)
Stopped (Back-up)
In operation (Grid-connected)
In operation (Back-up)
Error
Generation with
Inspection notice
Normal state
Displays the current status
Remaining battery level
Displays the status of battery
Operation mode
Displays the current mode
[SELF]: Maximum self-
consumption mode
[ProG]: Programmed
charge/discharge time mode
[bu]: Back-up mode
[rc]: Remote control
Stopped via User’s command.
”PF” will display.
If “ON/OFF (CANCEL)” is pressed for one
second, the system will start the back-up
operation.
The system in grid operation display
indicates charge or discharge power.
If "ON/OFF (CANCEL)" is pressed for
one second, the system will stop.
System shows the Inspection notice.
Period until inspection added.
(See 10-3)
The system in back-up operation,
indicates output power and “PF”.
If “ON/OFF (CANCEL)” is pressed for
one second, the system will stop.
The system has abnormally stopped
and indicates error mode (F/H/U/P/E)
and code.
▪
Press the "MENU (ENTER)" to change the
display:
Year→Month→Day→Hour→Minute
▪ Press "DATA (▲)" or "CLOCK (▼)" to
change the selected (i.e. blinking) value.
▪
The new setting values are displayed when
the setting is completed.
Stopped via User’s command.
If “ON/OFF (CANCEL)” is pressed for
one second, the system will start the grid
operation.
1 sec
3 sec
1 sec
Automatic
Automatic
▪ Press "DATA (▲)" or "CLOCK (▼)" to
change the selected (i.e. blinking) value.
▪ Press "DATA (▲)" or "CLOCK (▼)" to
switch the display item.
* This only mentions basic operations. Check each chapter for details.
