Panasonic LJ-NA02 User Manual Download Page 27

Page: 27 / 32

The list of error codes is shown below.
Check the error code in the display panel and address the issue by referencing the information below.

Error code

Description/where to check

E010

Abnormal in grid (High grid voltage)

The system operation will resume automatically as
soon as the commercial power supply is normal.

E020

Abnormal in grid (Low grid voltage)

→ Especially when power fails.

E030

Abnormal in grid (AC over frequency)

E040

Abnormal in grid (AC under frequency)

E060

Abnormal in grid (Islanding)

E070

Abnormal in grid (Instant over voltage)

E080

Abnormal in grid (Decrease in
instantaneous voltage)

P170

Under voltage

Please check the load which is connected to an
electrical outlet for backup. Its operation will resume
automatically after an abnormal eliminated.

P300

Overload

U030

Overload ("P300" 10 times in a row)

U060

Under voltage ("P170" 10 times in a row)

P620, P690

Battery module is over discharged.

After the battery is charged by a grid power, starts
the normal operation.

P660, P700

Battery module is high temperature.

If the temperature of the built-in battery falls within
the operating temperature range, this product will
resume operation automatically.

P350

There is a problem with the storage battery
system. Or internal DC protector is off. Or
the lines are disconnected.

Please contact the repair service.

P430, U020

Communications anomaly

Please contact the repair service.

H010-H490

There is a problem with the battery module.

Please contact the repair service.

H500-H990

There is a problem with the storage battery
system.

F010-F490

There is a problem with the battery module.

F500-F990

There is a problem with the storage battery
system.

The PXXX other
than those above

There is a problem with the storage battery
system.

After an abnormality is eliminated, this product will
resume operation automatically.
When operations do not resume, please contact the
repair service.

The UXXX other
than those above

There is a problem with the storage battery
system.

Please restart the operation.

Press the "ON/OFF (CANCEL)" for three seconds to

clear the error.

H290

Battery lifespan

Please contact the repair service.

Summary of Contents for LJ-NA02

































Search results

Summary of Contents for LJ-NA02

Reviews:

Related manuals for LJ-NA02

Brands by name

Popular brands

Panasonic LJ-NA02, User Manual

Search results

Summary of Contents for LJ-NA02

Reviews:

Related manuals for LJ-NA02

Brands by name

Popular brands