Panasonic KXTVS200 - VOICE MAIL SYSTEM, Subscriber'S Manual

Page: 63 / 85

4.8 Message Waiting Notification
Special Features
63
7.
To assign telephone or beeper numbers, go to Step 8.
To delete an existing telephone number, go to Step 9.
To change an existing telephone number, go to Step 10.
8.
Press [3] to assign telephone or beeper numbers.
a)
Press [1], [2], or [3] to enter a telephone number for the first time.
b)
Enter the telephone number at the completion of the previous message. Press [9] or a line
access code (contact your System Manager if you do not know your code) [area code
- if needed] [7 - digit telephone number].
Enter a pause by entering the telephone number up to the point
where the pause must be placed and wait.
The options menu will played - Press [5] to enter a pause.
The options menu will be played again.
Press [4] to add more digits then complete entry of the telephone number.
c)
Press [2] to accept the number entered.
(The status selected is repeated)
To change the first telephone number, Press [1].
To change the second telephone number, Press [2].
To change the third telephone number, Press [3].
(1st, 2nd, etc.) telephone number is not assigned.
Any digit on the telephone keypad can be used. Enter the
telephone number and wait. To insert a pause or special
command, enter the partial number and wait for the options
menu.
Telephone number is (number entered is stated).
To change, Press [1].
To accept, Press [2].
To review, Press [3].
To add more digits, Press [4].
To insert a pause, Press [5].
To set dial mode, Press [6].
To insert a wait for dial tone, Press [7].
To insert a beeper display command, Press [8].