*1 If you program these settings using one of the handsets, you do not need to program the
same item using another handset. (KX-TGC212)
*2 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select
“
Caller ID
”
. To turn this feature off, select
“
Manual
”
.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 13).
*3 KX-TGC212
*4 The ringer tone may continue to play for several seconds even if the caller has already hung
up. You may either hear a dial tone or no one on the line when you answer the call.
*5 The preset melodies in this product (
“
Ringtone 3
”
-
“
Ringtone 15
”
) are used with
permission of © 2012 Copyrights Vision Inc.
*6 If you do not want the unit to ring before the caller information is received, set to
“
Off
”
.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your service provider/telephone company.
*7 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*8 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*9 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*10 The default setting will be as follows if you select the following regional codes when
changing the unit’s region setting (page 25):
“
Česká rep.
”
=
“
100 msec.
”
“
Slovensko
”
=
“
100 msec.
”
*11 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*12 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R
Make sure the unit’s date and time setting
is correct (page 13).
1
M
N#720
2
Select an alarm by pressing
1
to
3
.
a
M
OK
N
3
MbN
: Select the desired alarm option.
a
M
OK
N
“
Off
”
Turns alarm off. Go to step 9.
“
Once
”
An alarm sounds once at the set time.
“
Daily
”
An alarm sounds daily at the set time.
Go to step 5.
“
Weekly
”
Alarm sounds weekly at the set time(s).
22
Programming
TGC210_212FX_(en-en)_0410_ver.031.pdf 22
2014/04/10 16:35:46
