Blocking incoming calls that
have no phone number
You can reject calls when no phone number is
provided, such as private callers.
1
M
N#240
2
MbN
: Select the desired setting.
a
M
OK
N
3
M
N
Viewing/editing/erasing call
block numbers
1
M
N#217
2
MbN
:
“
Single Number
”
or
“
Range of
Numbers
”
a
M
OK
N
3
MbN
: Select the desired entry.
R
To exit, press
M
N
.
4
To edit a number:
M
N
a
Edit the number.
a
M
OK
N
a
M
N
To erase a number:
M
N
a
MbN
:
“
Yes
”
a
M
OK
N
a
M
N
Note:
R
When editing, press the desired dial key to
add,
M
C
N
to erase.
Erasing all call block numbers
1
M
N#217
2
MbN
:
“
Single Number
”
or
“
Range of
Numbers
”
a
M
OK
N
3
M
N
a
MbN
:
“
Erase All
”
a
M
OK
N
4
MbN
:
“
Yes
”
a
M
OK
N
5
MbN
:
“
Yes
”
a
M
OK
N
a
M
N
Other programming
Changing the handset name
Each handset can be given a customised
name (“Bob”, “Kitchen”, etc.). This is useful
when you make intercom calls between
handsets. You can also select whether or not
the handset name is displayed in standby
mode. The default setting is
“
No
”
. If you select
“
Yes
”
without entering any handset name,
“
Handset 1
”
or
“
Handset 2
”
is displayed.
1
M
N#104
2
Enter the desired name (10 characters
max.).
3
M
OK
N
4
MbN
: Select the desired setting.
a
M
OK
N
2 times
a
M
N
Call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
M
N#256
2
Enter the base unit PIN (default:
“
0000
”
).
R
If you forget your PIN, contact an
authorised service centre.
3
Select the handsets to be restricted by
pressing
1
to
2
.
R
All handsets registered to the base unit
are displayed.
R
“ ” is displayed next to the selected
handset numbers.
R
To cancel a selected handset, press
the same dial key again. “ ”
disappears.
4
M
OK
N
5
Select a memory location by pressing
1
to
6
.
a
M
OK
N
6
Enter the phone number or area code to
be restricted (8 digits max.).
a
M
OK
N
a
M
N
Changing the base unit PIN
Important:
R
If you change the PIN (Personal
Identification Number), please make note of
24
Programming
TGC210_212FX_(en-en)_0410_ver.031.pdf 24
2014/04/10 16:35:46
