your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, contact
an authorised service centre.
1
M
N#132
2
Enter the current 4-digit base unit PIN
(default:
“
0000
”
).
3
Enter the new 4-digit base unit PIN.
a
M
OK
N
4
MbN
:
“
Yes
”
a
M
OK
N
a
M
N
Changing the unit’s region
setting/Resetting the base unit
1
M
N#136
2
MbN
: Select the desired country.
a
M
OK
N
“
Other
”
= Countries except Czech and
Slovakia
“
Česká rep.
”
= Czech
“
Slovensko
”
= Slovakia
3
MbN
:
“
Yes
”
a
M
OK
N
a
M
N
Note:
R
Changing the unit’s region setting may
cause the settings for your country or your
customised settings to return to their default
settings.
Increasing the range of the base
unit
You can increase the signal range of the base
unit by using a DECT repeater. Please use
only the Panasonic DECT repeater noted on
page 3. Contact your Panasonic dealer for
details.
Important:
R
Before registering the repeater to this base
unit, you must turn the repeater mode on.
R
Do not use more than one repeater at a
time.
Setting the repeater mode
1
M
N#138
2
MbN
: Select the desired setting.
a
M
OK
N
a
M
N
Registering the DECT repeater
(KX-A405) to the base unit
Note:
R
Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the
DECT repeater.
1
Base unit:
Press and hold
M
N
for about 5 seconds.
2
DECT repeater:
Connect the AC adaptor, then wait until
the
indicator and
indicator light
green.
3
Base unit:
To exit the registration mode, press
M
N
.
25
Programming
TGC210_212FX_(en-en)_0410_ver.031.pdf 25
2014/04/10 16:35:47
