Services
Program any telephone system feature (queue, caller group, virtual conference room, etc.) to one of
your function keys. This requires the service being assigned to an extension. Pressing the
programmed function key then initiates a call to the service.
Functions via *-codes
Control codes allow direct access to the telephone system’s functions. The following codes apply:
Code
Description
**##
Restart devices, only for
snom devices!
#+n
Use outside line "n" to call the telephone number ("n" replaces the “0” otherwise required
to access an outside line)
*1
Start and end voice recording (if this function is enabled for the extension)
*11+TN
Permanent call forwarding to telephone number (TN)
**11
Cancel permanent call forwarding
*12+TN
If not available, forward to telephone number (TN)
**12
Cancel call forwarding if no answer
*13+TN
If busy, forward call to telephone number (TN)
**13
Cancel call forwarding if busy
*14+TN
If not registered, forward to telephone number (TN)
**14
Cancel forward if unregistered
*2+Speed dial
Directly dial the extension/telephone number via speed dial
*3
Pick up the last call ringing on the system
*3+EXT
Pick up call coming in to the extension (EXT)
*490
Activate call waiting
**490
Deactivate call waiting
*5
If busy, automatic callback activated
**5
If busy, automatic callback deactivated
*
55
Specify primary device within a premium extension (Premium Package)
*73+nnnn
1
Call eFax additional costs will occur
*74+nnnn
1
Call time control nnnn
*75+nnnn
1
Call group nnnn
*76+nnnn
1