Troubleshooting
Problem
Possible Cause
Solution
The handset does not
work.
The battery is drained.
Charge the battery fully.
For details, see "Charging the Battery
(Page 54)".
The power is off.
•
Turn it on.
For details, see "Location of
Controls (Page 14)".
•
Re-insert the battery, and then
set the handset on the charger.
For details, see "Battery
Installation (Page 53)", and
"Charging the Battery (Page 54)".
The handset does not
ring.
Ringer volume is set to "
Off
".
(If the ringer volume is set to
"
Off
", is displayed.)
Adjust the ringer volume level.
For details, see "Adjusting the Ringer
Volume (Page 24)".
Silent Mode is on.
(If Silent Mode is on, the icon is
displayed.)
Turn off Silent Mode.
For details, see "Silent Mode
(Page 16)".
It is difficult to have a
conversation when in
Hands-free mode.
The microphone is facing the
wrong direction or is obstructed
during the conversation.
The front of the handset should face
you, and the microphone should not
be covered. For details, see "Location
of Controls (Page 14)".
You cannot make/
receive a call.
The handset is out of range, or the
CS is busy.
Move closer to the CS or try again
later.
The radio channel is busy, or a
radio communication error
occurred.
Try again later.
You cannot dial.
The number that you dialed is
restricted by your phone system.
Consult your administrator or dealer.
Key lock mode is on.
To cancel the mode, press and hold
for about 2 seconds.
For details, see "Key Lock
(Page 16)".
The radio channel is busy or a
radio communication error
occurred.
Try again later.
The handset stops
working during
operation.
An unknown error has occurred.
•
Turn the handset off, and then
turn it back on.
For details, see "Location of
Controls (Page 14)".
•
Re-insert the battery and try
again.
For details, see "Battery
Installation (Page 53)".
Document Version 2013-03
Operating Instructions
57
Appendix
