Panasonic KX-TVP50, Installation Manual

Page: 79 / 380

INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOGUE PBX AND KX-TD DIGITAL PBX
Installation Manual 79
4.
Press STORE. The STORE indicator light turns on.
The display shows the initial programming mode.
5.
For KX-TA series PBX
Set the MEMORY switch to "SET".
For KX-TD series PBX
Press the PROGRAM button or lift the handset.
6.
Repeat these steps for each telephone.
The Live Call Screening Cancel Button Assignment is optional; Live Call Screening can also
be canceled by Pressing the FLASH button.
4.4.8 Two-Way Recording Button Assignment via Station
Programming
For the Two-Way Recording feature to work at an extension, the extension must have a TWR
button on it. This key must either be a DSS/BLF or CO key with a lamp. Follow the procedure
below to assign a TWR button on an extension. (This is a station level programme and should
be done at each individual telephone.)
1.
Enter PITS Programming:
For KX-TA series PBX
With the phone on-hook, Set the MEMORY switch to "PROGRAM".
(Display changes to PITS-PGM Mode.)
For KX-TD series PBX
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PITS-PGM Mode.)
2.
Press the Flexible button (CO or DSS/BLF) that you want to assign as the TWR button.
3.
Dial [90].
Screen output: 2Way-Rec:
4.
Dial the Voice Mail extension number.
Screen output: 2Way-Rec: _ _ _
(_ _ _ = The extension number you entered).
5.
Press Store.
6.
For KX-TA series PBX
Set the MEMORY switch to "SET".
For KX-TD series PBX
Press the PROGRAM button or lift the handset.
7.
Repeat these steps for each telephone.
Conditions: This button must be a CO or DSS/BLF key to be
programmed as a TWR button. If this key is pressed
when all Voice Mail ports are busy, the user will hear a
reorder tone.