Panasonic KX-TVP50, Installation Manual

Page: 297 / 380

MESSAGE MANAGER'S GUIDE
Installation Manual 297
3.
The VPS plays the current password setting. Press [1] to change the password. If a
password has not yet been assigned, go to Step 4. Press [2] to accept the current setting—
Go to Step 6.
4.
Type the password and Press [#].
5.
The VPS plays the current password setting. Press [2] to accept it.
6.
The VPS plays the current operator's extension setting. Press [1] to change or assign the
operator's extension. Press [2] to accept the current setting, or Press [3] to delete the current
setting—Go to Step 9.
Note
Operator 1's extension number cannot be deleted.
7.
Type the extension number.
8.
The VPS plays the current extension setting. Press [2] to accept it.
9.
Repeat Steps 6-8 to assign or to delete the extension number for the Day, Night, Lunch and
Break Modes for each operator.
10.
The VPS plays the current Telephone number 1 setting. Press [1] to change the telephone
number. If a telephone number has not yet been assigned, go to Step 11. Press [2] to accept
the current setting—Go to Step 13.
11.
Type the telephone number using "0-9" and " ".
Notes
• Please make sure you begin the telephone number with a Line Access Code (to
seize an outside [CO] line).
• The maximum number of characters allowed to be entered is 16.
12.
The VPS plays the current Telephone number 1 setting. Press [2] to accept it.
13.
The VPS plays the current Telephone number 2 setting. Press [1] to change the telephone
number. If a telephone number has not yet been assigned, go to Step 14. Press [2] to accept
the current setting.
14.
Type the telephone number using "0-9" and " ".
15.
The VPS plays the current Telephone number 2 setting. Press [2] to accept it.