Note:
R
The date and time may be incorrect when
the battery is dead or replaced. In this case,
set the date and time again.
R
To adjust the hour for summer time, see
page 28.
Clock display
You can select how the date and time is
displayed in standby mode from the following
3 options;
–
“
Large
”
: Displays only the time in large
font.
–
“
Normal
”
: Displays the date and time.
–
“
Off
”
: Does not display the date or time.
The default setting is
“
Large
”
.
1
®
®
2
MbN
:
“
Display
”
®
3
MbN
:
“
Clock Display
”
®
4
MbN
: Select the desired setting.
®
Display font size
You can adjust the size of characters/numbers
shown on the display. The default setting is
“
Middle
”
.
1
®
®
2
MbN
:
“
Display
”
®
3
MbN
:
“
Font Size
”
®
4
MbN
: Select the desired font size.
Note:
R
You can adjust the display font size by
simply pressing
M N
or
M N
unless you are
on a call or the phone is ringing for an
incoming call.
Profile
You can set the silent mode by pressing
M
N
for about 2 seconds in standby mode.
Note:
R
You can also change the profile setting
from the menu tree (page 25).
Key lock
The keypad can be locked to prevent any keys
from being accidentally pressed.
Slide
M N
(right side of the phone) to lock or
unlock.
Audible dialling
When you turn this feature on, numbers are
announced when pressing dial keys. The
default setting is
“
Normal
”
.
1
®
®
2
MbN
:
“
Sound
”
®
3
MbN
:
“
Audible Dialling
”
®
4
MbN
: Select
“
Loud
”
,
“
Normal
”
, or
“
Off
”
.
®
Note:
R
The language used for the dial
announcement is the same as the display
language (page 13).
Telecoil (T-coil) mode
When you activate the Telecoil mode of your
hearing aid, turn this feature
“
On
”
. The default
setting is
“
Off
”
.
1
®
®
2
MbN
:
“
Telecoil Mode
”
®
3
MbN
: Select the desired setting.
®
Note:
R
When this feature is on, you cannot use the
voice equalizer feature (page 16).
14
Getting Started
TU311SPBE(en-en)_0912_ver011.pdf14 14
2011/09/12 10:11:06
