Useful Information
25
Call Display
Power failure
While storing an item in
the phonebook, the unit
starts to ring.
L
A call is being received. Answer the call and try again
from the beginning after a call is finished.
The display exits the
phonebook while
searching.
L
The unit automatically exits after 1 minute of inactivity.
Problem
Cause & solution
The unit does not display
the caller’s name and/or
phone number.
L
You have not subscribed to Call Display service.
Contact your telephone service provider to subscribe.
L
If your unit is connected to any additional telephone
equipment such as Call Display box or wireless
telephone jack, disconnect the unit from the equipment
and plug the unit directly into the wall jack.
L
If your unit is connected to a telephone line with DSL
service, we recommend connecting a noise filter
between the unit and the telephone line jack (page 6).
Contact your DSL provider for details.
L
The name display service may not be available in some
areas. Contact your telephone service provider for
details.
L
Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
L
The caller requested not to send caller information
(page 14).
L
Generally caller information is displayed from the 2nd
ring.
L
If the unit is connected to a PBX system, caller
information may not be received properly. Consult your
PBX supplier.
I cannot dial the phone
number edited in the
caller list.
L
The phone number you dialed might have an incorrect
edited pattern (for example, the long distance “1” or the
area code is missing). Edit the phone number with
another pattern (page 15).
The display exits the
caller list while searching.
L
The unit automatically exits after 1 minute of inactivity.
Problem
Cause & solution
The unit will not function.
L
This product is not designed to make calls in the event
of a power failure.
Problem
Cause & solution
E-PQQX14855ZA.book 25 ページ 2005年7月29日 金曜日 午後7時13分