Panasonic KX-TS600W Operating Instructions Manual Download

Page: 7 / 56

Preparation

For assistance, please visit http://www.panasonic.com/phonehelp

If you subscribe to a DSL service

• Please attach a noise filter (contact your DSL provider) to the telephone line

between the base unit and the telephone line jack in the event of the following:

Noise is heard during conversations.

Caller ID feature (p. 20) do not function properly.

Connecting a Communication Device

If you connect a communication device (computer, modem, fax, answering
machine, etc.) to the telephone line, you can connect it through this unit
using the DATA jack.

After connecting the handset and telephone line cord (p. 6), connect the
communication device telephone line cord to the DATA jack.

• Make sure the communication device is not in use before using this unit (making

calls, storing phone numbers in memory etc.) or the communication device may
not operate properly.

Noise filter
(For DSL users)

To Single-Line
Telephone Jack

Telephone
Line Cord

Computer
Modem
Fax
Answering Machine

DATA

TS600W.book Page 7 Friday, October 28, 2005 2:10 PM

Summary of Contents for KX-TS600W

























































Search results

Summary of Contents for KX-TS600W

Reviews:

Related manuals for KX-TS600W

Brands by name

Popular brands

Panasonic KX-TS600W, Operating Instructions Manual

Search results

Summary of Contents for KX-TS600W

Reviews:

Related manuals for KX-TS600W

Brands by name

Popular brands