Panasonic KX-TS600W Operating Instructions Manual Download | Manualshive

Page: 20 / 56

background image

20

For assistance, please visit http://www.panasonic.com/phonehelp

This unit is compatible with a Caller ID service offered by your telephone
company. If you subscribe to a Caller ID service, the calling party’s
information will be displayed when the unit is ringing.

The unit can record information of up to 50 incoming calls, including the
time and date received, in the Caller List. The Caller List information is
sorted from the most recent to the oldest call. When the 51st call is
received, the oldest call is deleted.

Using the list, you can automatically call back a caller. You can store the
callers’ numbers from the Caller List in the Phonebook memory or the
Direct Dial memory.

How caller information is displayed when a call is received

*Private name display

If you receive a call from one of the same
phone numbers stored in the Phonebook or
Direct Dial memory, the caller’s name will be
displayed.

• To use this function, names and phone numbers must be stored in the Phonebook

(p. 28) or Direct Dial memory (p. 34).

• Caller information will not be displayed in the following cases:

— If the caller dialed from an area which does not provide a Caller ID service, the

display will show “

Out of area

”.

— If the caller has requested not to display his/her information, the display will

show “

Private caller

”.

— If a long distance call is identified and the caller’s name and/or number cannot

be received, the display will show “

Long distance

”.

• If your unit is connected to a PBX which does not support Caller ID services, you

cannot access those services.

• If the batteries installed in the unit have expired, Caller ID services will not be

available.

• If the name and the time/date display service is available in your area, the

display will show caller’s names and the time/date the calls were received. For
further information, please contact your telephone company.

The display shows the caller’s name
and phone number when the unit is
ringing.*

• After you answer the call, the display

will show the length of the call.

The RINGER indicator
will flash quickly when a
call is being received.

SMITH,JACK

1-111-444-7777

ROBINSON,TINA

1-111-321-4444

Caller ID Service

TS600W.book Page 20 Friday, October 28, 2005 2:10 PM

«
...
18
19
20
21
22
...
»

Summary of Contents for KX-TS600W

























































Reviews:

No comments

Related manuals for KX-TS600W

-295861 - Corded Desktop CID Itad

Brand: GE Pages: 44

Brand: Accutone Pages: 6

Univerge SV9100

Brand: NEC Pages: 6

Univerge SV9100

Brand: NEC Pages: 10

Univerge UM8000

Brand: NEC Pages: 7

Brand: NEC Pages: 46

Brand: NEC Pages: 39

Brand: NEC Pages: 5

Brand: NEC Pages: 150

Univerge SV9100

Brand: NEC Pages: 77

Brand: NEC Pages: 56

Brand: Samsung Pages: 128

Brand: Samsung Pages: 33

Brand: Samsung Pages: 2

Brand: Yealink Pages: 2

DVX-2000MS-10P - VoiceCenter IP Phone Sys...

Brand: D-Link Pages: 20

XDECT SSE47 Series

Brand: Uniden Pages: 44

Brand: Uniden Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands