Panasonic KX-TS600EX Operating Instructions Manual Download Page 6

Page: 6 / 48

Installing the Batteries

Press down in the direction of the arrow
and open the cover (

Install the batteries in the proper order
as shown (

), matching the correct

polarity.

Close the battery cover.

• Batteries are not included with the unit.
• Install three high quality “AA” size Alkaline (LR6) or Manganese (R6, UM-3)

batteries. We recommend to use Panasonic batteries.
Battery life:

—about six months when using Alkaline batteries.
—about three months when using Manganese batteries.

Battery life may depend on usage conditions and ambient temperature.

• Make sure batteries were inserted properly inphase to ensure the functionality of

this unit.

• Please refer to page 43 for battery replacement and precautions.

Connecting the Handset/Telephone Line Cord

After line connection, lift the handset to check for a dial tone.

• Use only a Panasonic Handset for the KX-TS600EXW or KX-TS600EXB.
• Use only the telephone line cord included with the unit.
• If your unit is connected to a PBX which does not support Caller ID services, you

cannot access those services.

• KX-TS600EXW or KX-TS600EXB is not designed to be used with rotary

(pulse dialing) services.

THE UNIT MAY NOT WORK PROPERLY WITHOUT BATTERIES.

Handset Cord

Handset

LINE

Telephone Line
Cord

To Single-Line
Telephone Jack

Settings

TS600EX.book Page 6 Wednesday, April 5, 2006 12:25 PM

Summary of Contents for KX-TS600EX

















































Search results

Summary of Contents for KX-TS600EX

Reviews:

Related manuals for KX-TS600EX

Brands by name

Popular brands

Panasonic KX-TS600EX, Operating Instructions Manual

Search results

Summary of Contents for KX-TS600EX

Reviews:

Related manuals for KX-TS600EX

Brands by name

Popular brands