Making/Answering Calls
30
For assistance, please visit http://www.panasonic.com/phonehelp
Flash time
The flash time depends on your
telephone exchange or host PBX. You
can select the following flash time:
80
ms
,
100 ms
,
200 ms
,
300 ms
,
400 ms
,
500 ms
,
600 ms
, and
700 ms
.
The default setting is “
600 ms
”.
Important:
L
Make sure that the unit is in standby
mode.
1
Press
{
MENU/SET
}
.
2
Select “
Phone Setup
”, then press
{
MENU/SET
}
.
3
Select “
Flash Time
”, then press
{
MENU/SET
}
.
4
Select the desired setting, then press
{
MENU/SET
}
.
5
Press and hold
{
MENU/SET
}
to
return to standby mode.
Note:
L
To return to the previous menu, press
{
<
}
.
L
If you are connected via a PBX, a
longer flash time may be necessary to
use PBX functions (transferring a call,
etc.). Consult your PBX installer for
the correct setting.
Temporary tone dialing (for
rotary/pulse service users)
You can temporarily switch the dialing
mode to tone when you need to access
touch tone services (for example,
answering services, telephone banking
services, etc.).
Press
{*}
(TONE) before entering
access numbers which require tone
dialing.
Recording a telephone
conversation
You can record your conversation while
on an outside call.
1
During an outside call, press
{
REC/ERASE ALL
}
, then press
{
MENU/SET
}
.
2
To stop recording, press
{
MENU/SET
}
again.
Note:
L
Many states have imposed regulations
on the manner in which 2-way
telephone conversations may be
recorded, so you should inform the
other party that the conversation is
being recorded. Consult your local
telephone company for further
information.
L
Recorded conversations are treated
as new messages.
L
To listen to the recorded conversation,
see “Listening to messages” on
page 60.
L
If the message memory becomes full,
“
Memory Full
” will blink and
recording will stop. Erase unnecessary
messages (see “Erasing a message”
on page 61).
L
The recording time of the telephone
conversation does not have limitation.
L
If there is no sound recorded for a
while, recording mode will end.
➔
Flash Time
Hold Reminder
Handsfree Mode
[
V
/
^
]:Scroll
Flash Time
=600 ms
[SET]:Save
[
V
/
^
]:Change
KXT4300̲OI.book Page 30 Friday, September 1, 2006 8:51 AM
