Panasonic KX-TGP600G Operating Instructions Manual Download Page 20

Page: 20 / 132

Location of Controls

Base Unit (KX-TGP600)

Status Indicator

Status

Meaning

Color

Light pattern

Green

The base unit is connected to the Internet. The startup
process is complete and you may now make and receive
internet calls.

Slow Flashing

The base unit is being used for a call.

The base unit is downloading data. Do not disconnect the
Ethernet cable or AC adaptor from the base unit until the
STATUS indicator stops flashing and lights in steady
green.

Quick Flashing

The handset/desk phone is busy.

Red

When the base unit is turned on, the STATUS indicator
lights in red for about 40 seconds.

Slow Flashing

The base unit is registering a handset/desk phone.

Quick Flashing

The base unit is paging handsets/desk phones (by using
the handset locator button).

Before Operating the Telephones

Summary of Contents for KX-TGP600G





































































































































Search results

Summary of Contents for KX-TGP600G

Reviews:

Related manuals for KX-TGP600G

Brands by name

Popular brands

Panasonic KX-TGP600G, Operating Instructions Manual

Search results

Summary of Contents for KX-TGP600G

Reviews:

Related manuals for KX-TGP600G

Brands by name

Popular brands