Panasonic KX-TGP600G, Operating Instructions Manual

Page: 69 / 132

/[CONF] during a conversation.
2. Dial the party you want to add to the conversation. a
CALL
/
Call
3.
CONF
/ / Conf
Note
R The
CONF
/ / Conf soft key can also be used to access the Conference function directly. To
display this key, edit the displayed soft keys. For details, see “Key Option”, Page 109.
R When using a KX-TPA65, /[CONF] can also be used at steps 1 and 3.
Removing a Party from the Conference (when connected to the KX-TGP600 only)
During a conference, you can remove other parties from the conference. However, this operation is
available only during conference calls you initiate.
1. During a conference call, press
KX-TPA60:
/ /[HOLD/MSG]
KX-TPA65:
/ /[HOLD]
KX-TPA68:
/[HOLD]
2. /[LINE]
3. Press the dial key, or press [ D ] or [ C ], and then press
OK
to select the LINE number that
corresponds to the party you want to disconnect.
4. KX-TPA60:
a /[LINE]
KX-TPA65/KX-TPA68:
On-hook
a /[LINE]
5. Press the dial key, or press [ D ] or [ C ], and then press
OK
to select the LINE number that
corresponds to the remaining party.
Note
KX-TPA65/KX-TPA68:
R To reestablish the conference without removing either party, press /[FUNC]/[FUNCTION], and then
"Conference" after step 3.
Ending a Conference Call
To go on-hook and end the conference call,
KX-TPA60:
press
.
KX-TPA65/KX-TPA68:
On-hook
Mute
You can disable the microphone or the handset to consult privately with others in the room while listening
to the other party on the phone through the speaker or the handset.
To set/cancel
1. /
MUTE
/ Mute
69
During a Conversation