Panasonic KX-TGP600G, Operating Instructions Manual

Page: 99 / 132

*4 Drive the screw to this point.
*5 83 mm (3 1/4 in)
*6 100 mm (3 15/16 in)
R You can find a wall mounting template at the end of this manual.
R When inserting screws, avoid pipes and electrical cables, etc., that may be present/buried.
R The screw heads should not be flush to the wall.
R Certain types of wall may require plugs to be anchored in the wall before the screws are inserted.
Hooking the Handset (KX-TPA65/KX-TPA68)
To Hook the Handset During a Conversation
1. Hook the handset over the top edge of the unit.
To Lock the Handset Hook when the Unit is Wall Mounted
KX-TPA65/KX-TPA68 (Desk Phone)
1. Remove the handset hook from the slot.
2. Turn it up-side-down.
3. Slide the handset hook back into the slot until it locks.
4. Handset is safely hooked when it is in the cradle.
Updating the Software
When the base unit requests to update the handset/desk phone software, the handsets/desk phones
registered to the base unit will start their software update automatically.
Updating the Handset/Desk Phone Software
The following handsets/desk phones can update their own software, which can be downloaded through
the KX-TGP600 automatically:
– KX-TPA60
– KX-TPA65/KX-TPA68
– KX-UDT series (except for KX-UDT111)
*1
99
Installation and Setup