Menu list
Problem
Cause/solution
The display is in a
language I cannot read.
R
Change the display language (page 15).
I cannot activate the eco
mode.
R
You cannot set eco mode when you set the repeater mode
“
On
”
. If required, set the repeater mode to
“
Off
”
(page 41).
I cannot register a handset
to a base unit.
R
The maximum number of base units (4) is already registered to
the handset. Cancel unused base unit registrations from the
handset (page 41).
R
You entered the wrong PIN. If you forget your PIN, see “I
cannot remember the PIN.” (page 55).
I cannot remember the
PIN.
R
Change the PIN using the following method.
1
M
MENU
N#132
2
*7000
3
Enter the new 4-digit base unit PIN.
a
M
OK
N
4
MbN
:
“
Yes
”
a
M
OK
N
a
M
N
I cannot remember the
key lock mode password.
R
If you forget your password, enter
*7000
instead of your
key lock password.
Battery recharge
Problem
Cause/solution
The handset beeps and/or
flashes.
R
Battery charge is low. Fully charge the batteries (page 12).
I fully charged the
batteries, but
–
still flashes or
– the operating time
seems to be shorter.
R
Clean the battery ends (
,
) and the charge contacts with
a dry cloth and charge again.
R
It is time to replace the batteries (page 11).
Making/answering calls, intercom
Problem
Cause/solution
is displayed.
R
The handset is too far from the base unit. Move closer.
R
The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R
The handset is not registered to the base unit. Register it
(page 41).
R
Activating eco mode reduces the range of the base unit in
standby mode. If required, turn eco mode off (page 16).
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
55
Useful Information
