Panasonic KX-TGE820E, Operating Instructions Manual

Page: 16 / 60

Recording your greeting
message
You can record your own greeting message
instead of using a pre-recorded greeting
message. See page 45 for details.
1
M MENU N#302
2
MbN : “
Yes
” a M OK N
3
Record a greeting message. a M STOP N
a M N
Other settings
Message indicator
The message indicator is located on top of the
handset and informs you of the following
status with its flashing.
Indicator Status
Flashing
rapidly – Incoming call is now being
received. (page 18)
– An alarm sounds.
(page 36)
Flashing
slowly
*1
– There are new messages.
(page 46)
– There are missed calls.
(page 43)
*1 To activate, setting of message indicator
must be “On”. (page 16)
Setting the message indicator
The message indicator for the following
feature must be “On”.
–
“
New Message
” (Default: On)
– “
Missed Call
” (Default: Off)
The settings can be set for each handset.
1
M MENU N#278
2
MbN : Select the desired setting and press
M SELECT N .
R “ ” is displayed next to the selected
features.
R To cancel a selected feature, press
M SELECT N again. “ ” disappears.
3
M OK N a M N
Note:
R If the message indicator flashes when the
handset is not placed on the base unit or
charger, battery consumption is faster than
usual.
Call block indicator
The call block indicator is located on the
bottom of the handset and informs you with its
flashing to indicate the caller's status in case
you want to disconnect the call (page 23) by
simply pressing
M N key.
The call block indicator flashes in below
conditions:
– When the unit receives a call from a caller
who is not registered in the phonebook
(page 28).
– When the unit receives a call from a caller
who is not registered in the allow name list
(page 26).
*1
– When the unit receives a call from the
number stored in the allowed number
database (page 25).
*1
*1 When the automated call block is set to
“
Block
” (page 25).
Eco mode setting
The following settings are available for eco
mode.
–
“
Eco
” : Reduces the base unit transmission
power by up to 90 % in standby mode.
When this setting is selected,
is
displayed on the handset display instead of
.
– “
Eco Plus
” : Reduces the base unit
transmission power completely in standby
mode.
When this setting is selected,
is
displayed on the handset display instead of
.
– “ Off ” (default setting): Turns off eco mode.
When this setting is selected, /
are not displayed on the handset display.
16 Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
Getting Started