Listening to Voice Mail messages
The unit lets you know that you have new
Voice Mail messages in the following way:
–
“
Voice mail msg. via phone co.
”
is displayed if message indication service is
available.
Handset
1
M
MENU
N#330
R
The speakerphone turns on.
2
Follow the pre-recorded instructions.
3
When finished, press
M
OFF
N
.
Note:
R
You can also use the
M
ACCESS
N
soft key,
if displayed, to play new Voice Mail
messages.
R
If the handset still indicates there are new
messages even after you have listened to
all new messages, turn it off by pressing
and holding
#
until the handset beeps.
Base unit
*1 KX-TG465SK series: page 3
To listen to Voice Mail messages, you have to
dial your Voice Mail access number manually.
Using the Smart function key
When
“
Voice mail msg. via phone
co.
”
is displayed and the
indicator
flashes slowly, there are new Voice Mail
messages.
Press
M
N
in step 1 on “Listening to Voice
R
“
New VM
”
must be set to “On” in “Setting
the Smart function key”, page 16.
R
If the Voice Mail (VM) access number is not
stored, the
indicator does not flash.
R
When the unit has new messages, new
Voice Mail messages, and missed calls, the
unit can be operated to play the new
messages first, play the new Voice Mail
messages next, and then show the missed
calls.
Wall mounting
Note:
R
Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit.
Base unit
1
Lead the AC adaptor cord and telephone
line cord through the hole in the wall
mounting adaptor in the direction of the
arrow.
2
Tuck the telephone line cord inside the
wall mounting adaptor (
A
). Connect the
AC adaptor cord and telephone line cord
(
B
).
1
AC adaptor cord
A
B
1
63
Useful Information
TGE26x_27xC(en)_1224_ver012.pdf 63
2013/12/24 15:43:33
