activated. You can talk or listen to new
messages without lifting up the handset. If
you want to perform further operations, lift
up the handset.
R
When the unit has new messages, new
Voice Mail messages, and missed calls, the
unit can be operated to play the new
messages first, play the new Voice Mail
messages next, and then show the missed
calls.
Setting the Smart function key
The Smart function key for the following
features must be “On”.
–
“
New message
”
(Default: On)
–
“
New VM
”
(Default: On)
–
“
Missed Call
”
(Default: Off)
The settings can be set for each handset.
1
M
MENU
N#278
2
MbN
: Select the desired setting and press
M
SELECT
N
.
R
“
” is displayed next to the selected
features.
R
To cancel a selected feature, press
M
SELECT
N
again. “
” disappears.
3
M
SAVE
N
a
M
OFF
N
Note:
R
If the
indicator flashes when the
handset is not placed on the base unit or
charger, battery consumption is faster than
usual.
Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is
“
Tone
”
.
“
Tone
”
: For tone dial service.
“
Pulse
”
: For rotary/pulse dial service.
1
M
MENU
N#120
2
MbN
: Select the desired setting.
3
M
SAVE
N
a
M
OFF
N
16
Getting Started
TGE26x_27xC(en)_1224_ver012.pdf 16
2013/12/24 15:43:29
